Instructions for Mixing and Use
Nasal Spray
Mixing the Solution
* Take the lid off the MT vial and wipe the top with a sterile wipe.
* Take the top off the sterile water, take the syringe and draw out a full (1ml) syringe of sterile water.
* Push the syringe into the center of the MT vial and push the water from the syringe into the vial (onto the side of the vial if possible)
* Draw out another full (1ml)syringe of water and repeat as above.
* Once all the water is in roll the vial between your fingers until dissolved (don't shake).
* Draw out all of the mixed solution from both vials with the syringe and place into your nasal bottle (gently)
​
Administering the MT 2
Insert the Nasal bottle into the nostril and depress nozzle. Do not inhale deeply after spray just continue to breath as normal.
​
Recommended Dosage for best results
Initially have 2 sprays per day. This is the loading dose. Do this for 4 days or until the desired shade of tan has been reached.
​
The switch to a maintenance dose. 2 sprays twice per week. The amount you will require will depend on how quickly your tan fades which is due to a wide range of factors and varies from person to person.
​
Injection
Mixing the solution
Flip off the cap from the MT-2 Tanning Injection vial.
Wipe the surface of the top of the vial with the enclosed alcohol wipe.
Wipe the surface of the injectable water tube with the enclosed alcohol wipe and discard the wipe.
Remove the enclosed syringe from the packaging. Making sure the injectable water tube is upright, twist the lid off the water.
Instert the needle of the syringe into the water & pull back the plunger of the syringe so you withdraw 1.5ml of water (1 full syringe and 1 half of a syringe) and slowly pull the syringe out.
Insert the syringe into the centre of the MT 2 Tanning Injection vial top and aiming the needle of the syringe at the side of the vial depress the plunger so you completely empty the syringe of the water and slowly remove the syringe from the vial (you may wish to add more water, some people say adding another quarter of a syringe cuts down on initial side effects).
Roll gently between your finger to help the solution to dissolve do not shake the solution.
Place the MT-II solution in the fridge for storage until ready for use.
Make sure you always put the syringe caps on and carefully before disposing of it.
You have now mixed your MT 2 Tanning Injection solution. Please store the mixed solution in the fridge, once mixed the solution can be stored refrigerated for up to 3 months. Unmixed the product can be stored in a cool dry place for up to twelve months
​
Administering the MT 2 by Injection
Holding the MT 2 Tanning Injection vial upright, insert the syringe in the middle of the grey cap.
Pull the plunger until you have 0.05ml of MT 2 in the syringe and slowly remove it.
Find a fleshy area of your skin – 4cm to the side of your belly button is the most common. Wipe the area with one of the alcohol wipes included.
Pinch 2cm either side of the area to be injected.
Holding the syringe like a pen, and at 90 degrees to your skin, swiftly insert the syringe into your skin.
Fully depress the plunger so all the MT 2 has emptied from the syringe and slowly withdraw.
Hold the alcohol wipe on the injected area for a minute.
​
Recomended Doseage for best results
We recommed that you initially inject 0.05ml to 0.1ml of MT2 for the first 3 days.
​
Once the desired level of tan is reached you can switch to a maitenance dose of 0.1ml ever once or twice per week.
​
The amount you will require will depend on the how quickly your tan fades which is due to a wide range of factors and varies from person to person. We recommened you increase or decrease the number of days between maintenance doses to achieve your desired result.